A live station turns merch into something guests watch get made. Each guest waits about two minutes, then walks off wearing it. Austin adds one stage most cities don't need: the gear ships as freight from our Fullerton shop and the crew flies in.
Weeks before
You send the logo or artwork, and we proof it and prep the screens or film transfers. Garments, sizes and stations get locked around your run-of-show. Art should be final about a week out, which is also when the blank order locks and the freight gets scheduled.
Event day
- Load-in and setup: presses, ink, blanks and tables arrive by freight, and the crew builds each station on about a 10×10 footprint with standard power.
- Guests choose: a size, a garment, a design or a patch. Picking it is what makes them care about it.
- We print live: up to 60 pieces an hour per press, and 100+ from a two-press station at full speed.
- They wear it out: a finished piece, still warm from the platen.
What the venue provides
About 10×10 ft per station, two standard 120V circuits, a level floor, and a line path that doesn't block the doors. Outdoors works too, with shade over the station in the warm months. The details are on the venue requirements page.
Picking a method
Lots of the same shirt points to screen printing. Full color or short runs point to DTF. A hat bar or embroidery adds a premium tier. There's more in how live printing works, or you can tell us about your Austin event.
Austin planning
What gets planned before the freight ships
Austin is a fly-out for us, so the station is planned on paper before anything leaves the Fullerton shop. We map the load-in, the power, where the line forms and where guests pick a size before they reach the press. At the Austin Convention Center that plan includes the marshalling window and the electrical order. On a Rainey Street patio or in an East Austin warehouse it's mostly shade, a level floor and the queue.
The kit doesn't change: presses, flash dryers, heat presses, blanks, folding tables, signage and trained printers. It ships as freight and the crew flies in. A standard station needs about 10×10 ft and two 120V circuits, and a two-press setup clears 100+ shirts an hour when the design menu is simple.